Milling Tools
CYCLO CUT HSK63A End Mills
(Sponsored Content) CYCLO CUT cutting tools offer integral shank HSK63A end mills for use in high speed machining of large aluminum structural components. Integral design allows indexable cutting while running at high RPM’s, and much higher cutting capabilities. Cutters are available up to 2.00” in diameter with reaches of 2.00” to 4.00”.
Read More
Milling Tool Line Features New Insert Size
Iscar’s Helido Upfeed line of high-feed milling tools now includes the H600 WXCU 0403 insert, which is designed for 16- and 20-mm-diameter tools. (The complete milling tool line features diameters ranging from 0.
Read More
Cutters For Composite Machining
LMT Onsrud’s diamond film-coated compression tool is suited for machining composite materials. The cutter geometry features a spiral design in which the upcut and downcut spiral flutes intersect from both directions and push the individual layers of the composite material together.
Read More
Face-Milling Cutter, Insert Line Expands
Additions to the M1200 series of face-milling cutters and inserts from Widia are suited for applications in steels, stainless steels, high-strength steels, cast irons and nonferrous materials. The M1200HF (high feed) face-milling system features 12 cutting edges for increased speeds and feeds.
Read More
Cutters Halve Cycle Time On Custom Racing Component
Seeking to improve production time on custom-built connecting rods for racecar engines, this shop invested in a light-duty VMC with an eye toward implementing high speed machining. Retooling with cutters from Ingersoll helped make the most of this new capability.
Read More
CYCLO CUT Cutting Tools
CYCLO CUT cutting tools offer high density face mills, excellent for finishing cast iron at extreme feed rates. Our unique clamping design allows individual adjustments of each insert for optimum surface finishes. Inserts are negative hexagon shaped allowing TWELVE indexes per insert. Cutters up to 20 inches in diameter are flange mounted.
Read More
Multi-Application Face Mill Features Three Insert Styles
Valenite’s V490 multi-application face mill is available with square, round or octagon inserts for general-purpose machining operations. With the ability to consolidate multiple applications with one face mill and three insert styles, the mill is adaptable to virtually any operation.
Read More
High-Performance Roughing End Mills
Monster Tool Company offers three- and four-flute square and ballnose end mills with chipbreaker geometry to allow high feed rates in roughing operations. Mega Monster tools are manufactured from fine-grain, sinter-hipped C-2 grade carbide material with 10-percent cobalt for aggressive slotting and pocket milling in stainless steels and high-temperature alloys.
Read More
End Mills Increases Metal Removal Rates, Tool Life
Seco Tools’ Jabro JHF180 MEGA-64 solid carbide end mill series is suited for machining hardened steels ranging from 48 to 62 HRC. The end mill features a rigid 0.
Read More
CYCLO CUT
MAG’s new CYCLO CUT 1.000” diameter 20 flute solid carbide Max-Flute endmill finishes titanium at 100 IPM machining .030 radial and 1.000” axial depth of cut with proven tool life of over four hours. The Max-Flute requires less machine power consumption over the competition, making it perfect for light duty 40 taper machining center spindles.
Read More
