Milling Tools
Multi-Flute Indexable Thread Milling
The Vardex multi-flute indexable thread mill is said to reduce thread machining cycle times. The inserts are available in either 0.
Read More
How Do You Get The Cutting Parameters Right For Small End Mills?
A reader recently asked about speed, feed rate and depth of cut when using small tools in steel.
Read More
Using Small End Mills In Steel Without Breaking
A reader wants to mill with small tools on a straightforward VMC used for full-sized work. MMS Online’s micromachining expert offers advice.
Read More
Button-Style Mill For Heavy Roughing Operations
Valenite LLC introduces the V200, a heavy-duty, button-style mill for facing and profiling. The tool utilizes VP2003 round inserts with MicroForm carbide-grade technology, which enables inserts to be direct-pressed with a micrograin structure.
Read More
Cutters Produce Wind Turbine Components
Through its Wind Power program, Emuge offers a lineup of tools that are optimized specifically for the production of wind turbine components. For the production of internal and external threads, the program provides taps ranging to 4 ½" (114 mm), roll form taps ranging to 2" (51 mm) and thread mills ranging to 4" (102 mm).
Read More
Milling Cutter Features Multiple Cutting Edges
The GFG-WFE shell-type thread milling cutter from JBO is suited for difficult-to-machine materials and large-batch production applications. Higher cutting speeds and feeds shorten machining time, while the number of cutting edges increases tool life.
Read More
CYCLO CUT Plunge Mill
MAG’s new 1.25” diameter CYCLO CUT Plunge Mill allows maximum metal removal rates at extended reaches using light duty machining centers. This new style cutter removes 3 cu/in/min of titanium in 7.00” deep pockets on a CAT 40 Vertical Machining Center.
Read MoreMilling Cutter Provides Multiple Cutting Edges
Seco’s new Square 6 shoulder milling cutter uses trigonal inserts with six cutting edges to boost productivity and lower the cost per insert edge. The inserts are available with three insert geometries and three pitches to allow the tool to be used for a variety of general machining operations, such as face milling, contouring, plunging, slotting and shoulder milling in steels, cast irons and hard materials.
Read MoreOctagonal Cutter Mills Steel, Cast Iron
The MultiEdge Double 8 cutter from LMT Fette is said to be ideal for economically machining mild steels and cast iron materials. Inserts can be used on both sides, for a total of 16 cutting edges.
Read More
Indexable Inserted High-Feed Tools
Suited for plunging, high-feed circular interpolation, ramping and enlarging existing holes, Lovejoy Tool Company’s high-feed 250 series tooling is said to be ideal for light, fast cuts in extended-reach applications and light-duty machines. High-performance, carbide-coated inserts are available for most materials.
Read More
