Milling Tools
New Tool, New Strategy Allow Five Times Faster Roughing
This shop realized a tool designed for fast feeds and shallow cutting depths could reduce the roughing cycle time of a large shipyard component from 20 to 4 minutes.
Read More
Max-Flute Solid Carbide End Mill
(Sponsored Content) MAG’s CYCLO CUT cutting tool line introduces the Max-Flute solid carbide end mill. The Max-Flute technology delivers a step-change in machining of a broad spectrum of jet engine components in both titanium and nickel alloys. MAG’s Max-Flute was also selected the winner of the prestigious 2009 Sir Henry Royce Awards for Technical Innovation.
Read More
Solid Carbide, Four-Flute End Mills
Iscar’s expanded Chatterfree line of solid carbide, four-flute end mills includes smaller diameter sizes of 0. 125", 0.
Read More
Expanded End Mill Line
Primary Cutter’s expanded Supermill-XP end mill line is available in chamfer, corner- radius and sharp-corner styles, as well as in regular, stub, long and extra-long lengths. The variable-pitch end mills feature a four-flute design and a 45-degree helix angle.
Read More
Variable-Design End Mills
OSG’s Exocarb Aero UVX variable index and variable helix end mills couple positive edge geometry with a variable helix design. The end mills can achieve more consistent, chatter-free milling versus common variable-design end mills, the company says.
Read More
Cutters Compress To Effectively Machine Composites
The combined up-cut and down-cut spiral flutes on these cutters compress layered composites to prevent delamination during machining.
Read More
CYCLO CUT HSK63A End Mills
(Sponsored Content) CYCLO CUT cutting tools offer integral shank HSK63A end mills for use in high speed machining of large aluminum structural components. Integral design allows indexable cutting while running at high RPM’s, and much higher cutting capabilities. Cutters are available up to 2.00” in diameter with reaches of 2.00” to 4.00”.
Read More
Milling Tool Line Features New Insert Size
Iscar’s Helido Upfeed line of high-feed milling tools now includes the H600 WXCU 0403 insert, which is designed for 16- and 20-mm-diameter tools. (The complete milling tool line features diameters ranging from 0.
Read More
Cutters For Composite Machining
LMT Onsrud’s diamond film-coated compression tool is suited for machining composite materials. The cutter geometry features a spiral design in which the upcut and downcut spiral flutes intersect from both directions and push the individual layers of the composite material together.
Read More
Face-Milling Cutter, Insert Line Expands
Additions to the M1200 series of face-milling cutters and inserts from Widia are suited for applications in steels, stainless steels, high-strength steels, cast irons and nonferrous materials. The M1200HF (high feed) face-milling system features 12 cutting edges for increased speeds and feeds.
Read More
