-
SPONSORED
-
-
-
-
-
MMS Blog
Simulation Software Enables "Lights-Out" Five-Axis Machining
Hall & Stavert has been manufacturing marine hardware for more than 65 years. The company incorporated Vericut machine-simulation software to verify NC programs and shorten turnaround time. Developed by CGTech, the solids-based software system interactively simulates the material-removal process of an NC program. The software depicts three- to five-axis milling/drilling and wire EDM operations as well as multi-axis turning and mill/turn machining.
Read MoreLean Manufacturing For The Job Shop
Lean practices are not just for predictable production. Here are the common-sense ways this low-volume job shop has implemented a leaner process.
Read MoreBeat The Heat With High-Pressure Coolant
In lieu of traditional flooding measures, multitasking machine operators can use high-pressure coolant strategically to improve chip control and tooling life while enhancing overall productivity.
Read MoreUSB Reader Inputs CNC Programs From A Flash Drive
USB flash memory devices (also called flash drives or data sticks) are a convenient way to move files from a laptop to a desktop PC, from a camera to a PC and so on. They can also be handy for storing and moving part programs for CNC machines on the shop floor.
Read MoreEMO 2007--A Bright Reflection Of The Times
EMO 2007, a major machine tool show held in Hannover, Germany, in September, will not be remembered for the new technology introduced at this show, although it was not without its noticeable highlights. Rather, it will be remembered as the show with a record number of attendees generating record numbers of sales leads and purchase agreements. This surely reflects the strong economic growth in the major industrial markets around the globe.
Read MoreConsider L:D When Choosing A Lathe For Small Parts
Should shops always defer to Swiss-type lathes to process small, long and often complex parts? Not necessarily. As a general rule, a Swiss-type is most appropriate for machining workpieces with L:D ratios of 4 to 1 or greater. Parts with lower L:D ratios may be machined economically on turn-mills.
Read MoreThinking About Shopfloor Interoperability-And Making It Happen
The significance of “plug-and-produce” integration for machine shops and manufacturing plants becomes clear from the perspective of an ERP software developer.
Read MoreAdaptive Machining For Turbine Blade Repair
Real-time-responding CNC brings new possibilities to difficult machining applications.
Read More3D Or Three-Axis Calibration: What’s The Difference?
Guarding against errors in the volumetric positioning of a machine tool is critical to machining contours and other 3D surfaces accurately.
Read MoreCreep-feed Grinding Is A Milling Process
Because creep-feed grinding is essentially a milling process, why not use a VMC? A grinding machine supplier describes how a VMC platform can make creep-feed grinding more effective.
Read MoreAir-Actuated Boring Tool Offers In-Process Gaging
An air-actuated boring tool semi-finishes cylinders on the down stroke and finishes on the up stroke. In-process gaging compensates for tool wear to maintain bore accuracy.
Read MoreDual-Carbide Technology Addresses Basic Drilling Challenge
A dual-carbide-grade drill has a micro-grain carbide core blended to provide toughness to prevent chipping at the drill's point. Surrounding the core is a second carbide grade that provides hardness needed for wear resistance at the drill's outer edges.
Read More