Tooling
New Milling Series From Kyocera Provides Deeper Depth of Cut
The MFH-Max reduces the number of passes needed to machine the workpiece with its ability to take on deeper depths of cut (max. 0.098" / 2.5 mm).
Read More
A More Efficient Way to Cut Near-Net Parts
Choosing the right milling insert is important: This insert from Iscar is designed for finishing near-net shaped parts quickly, while another makes high-feed machining more accessible with existing machining centers.
Watch
Gripper Finger Change System From Schunk Reduces Setup Time
Schunk claims its toolless jaw quick-change system reduces setup times to a minimum, therefore increasing the productivity and flexibility of the entire system.
Read More
Tungaloy Introduces High Feed Milling Cutter for Small Parts Machining
According to Tungaloy, the AddDoFeed02 inserts include an economical double-sided insert with four effective cutting edges, optimal inclination on the cutting edge that enables smooth chip evacuation and large positive rake that provides light cutting and process security.
Read More
Vektek Debuts Clamps With Patented Design
Westec 2021: Vektek's Twin Lever Link Clamp allows users to clamp two parts simultaneously or to clamp through a part opening on two sides. It features a rotary lug with 360 degrees of lever/body positioning.
Read More
Bluco Corp. Releases Modular Fixturing Line for Extra-Large Parts
Bluco’s 8024 Modular Fixturing Series has 80 mm grid spacing and 24 mm nominal bore size. The company’s application engineers will use the new 8024 series to design custom solutions for manufacturers of large parts.
Read More
Square Angled Toolholders Available From Thinbit
Thinbit Square Angled Toolholders position the insert at 30°, 45° or 60° angles for reliefs, undercuts and angled OD and face grooves. They come in a range of sizes.
Read More
Four-Flute Carbide Drill Increases OWSI's Feedrate Fourfold
Ceratizit’s line of WTX-HFDS drills saved OWSI 3.5 minutes per part on a difficult job and completely eliminated a secondary operation, increasing profitability.
Read More
Kyocera Upgrades High Speed Trochoidal and Peel Milling Tool
The T-Carb’s six-flute design reportedly enables higher feed rates at reduced tool loads, ultimately preventing breakage and failure. The ball end expansion now provides Series 51 tools 3D contouring and finishing capabilities in a variety of materials.
Read More
Walter Unveils Round Insert Milling Cutter
According to Walter, the new Xtra·Tec XT M5468 is suitable for steel, stainless steel, cast iron, non-ferrous material with difficult cutting properties and hard machining. The company claims it is ideal for copy milling with minimal material removal.
Read More
