Tooling
Pull Down Chuck
SMW Autoblok says its TX Pull-Down chuck features repeatability of up to 0. 0004″ (0. 01 mm) and is capable of operating under aggressive cutting conditions.
Read MoreMagnets Lift Flat, Round Materials
Eriez’s SafeHold XPL line of magnets can use one magnet to lift either flat or round materials. The magnets are available in six models with capacities ranging from 400 to 5,000 lbs for flat materials and 300 to 4,000 lbs for round materials. The small, lightweight magnets are constructed from Erium 3000 rare-earth, magnetic material, and they feature a powerful, magnetic force.
Read MoreMulti-Purpose Tool Performs 8 Operations
With one multi-purpose tool, Magafor says it can increase production, cost savings and quality. The Multi-V multi-function carbide tool is capable of performing eight separate operations—centering/spotting, V-grooving, engraving, counter sinking, interpolation drilling, chamfering and longitudinal chamfers. The multi-function tool can meet diameter needs ranging from 0.
Read MoreInserts For Aggressive Metalcutting
High-performance CNC-pressed Toroid inserts from Dapra are designed for aggressive metalcutting and long tool life. These thicker inserts offer enhanced heat absorption capabilities and feature a stronger cutting edge for heavier chip loads and greater shock absorption. Additionally, positive top rake results in reduced cutting forces and lower torque.
Read MoreVariable Rake End Mills
SGS Tool Company’s Z-Carb-AP variable rake end mill offers three stages of chatter suppression resulting in a quiet, stable milling operation. In stage one, unequal flute spacing disrupts the rhythmic pattern created by the cutting edge of common end mills. This suppresses the development of damaging harmonics.
Read MoreRing Groove Cutter Line
Designed specifically for the oil and gas industry, Greenleaf Corporation’s expanded Ring Max line of ring groove tooling is suited for difficult to machine materials. Combined with the company’s WG-300 or WG-600 whisker-reinforced ceramic inserts, the ring groove cutters can reduce cutting times from 30 min. to less than 1 min.
Read MoreDrill Point Grinders
Cuttermasters’ GSC drill point grinders are designed to regrind drills with diameters ranging from 0. 098 to 1. 032".
Read MoreLathe Toolholders For Efficient Coolant Use
Streamliner lathe toolholders feature coolant delivery through the shank and are said to be suited for low- or high-pressure delivery. To conserve coolant, the toolholders are equipped with interchangeable coolant-distribution plates for various volumes of air, mist or liquid. The coolant delivery is parallel to the top of the insert, which enables the coolant to have a positive effect at the shear zone.
Read More
Lathe and Feeder Talk Via Ethernet Interface
Research into the connectivity and communication between machine tools and equipment like bar feeders, part unloaders, pallet systems and even high-pressure coolant systems is yielding useful ability on the shop floor. In this case, LNS uses Internet technology in its S65 bar feeder to communicate with a PC-based Fanuc CNC running a Mori-Seiki NZ2000 lathe.
Read More
Automation Helps Move To High-Volume Production
This tool manufacturer had to automate its processes after switching from low-volume special orders to high-volume production runs. Since implementing Tsudakoma tilting rotary tables along with robotics and a pallet conveyor, the shop has increased sales by 400 percent.
Read More
