Tooling
Video: Helical Interpolation Vs. Drilling
A machining center able to maintain precise control at high feed rates makes it practical to machine holes through helical milling as an alternative to drilling.
Watch
Video: Micromilling With a Long Tool
This video clip illustrates micromilling at a high tool L:D ratio.
Watch
Hole Making: Combination Tools
This video demonstrates hole making. Hole making often involves sequential operations such as drill-then-tap. Combination tools that perform these operations simultaneously can eliminate tool changes, saving cycle time. Many combination tools call for helical interpolation. The video shows the same series of hole
Watch
Hydraulic Workholding Devices Allow Total-Perimeter Machining
Having access to the entire perimeter of a part minimizes set ups because shops can machine five sides of the part in one fixturing. This enables shops to reduce the total number of manufacturing operations, the number of times parts must be handled, the potential for part damage due to excessive handling and the o
Read More
The New Rules of Cutting Tools — Introduction
Cutting tool technology is evolving rapidly to respond to changing demands and more challenging workpiece materials. Shops today need to look at cutting tools differently. They need to look at cutting tool suppliers differently as well.
Read More
End Mill Comparisons in CFRP, Part 1 - Carbide Tool
Video shows the performance of coated carbide, diamond-coated, PCD and veined PCD tools in carbon fiber reinforced plastic. Part one in a four-part series.
Watch
The New Rules of Cutting Tools — Rule #1: Do More With Your Machine
The tooling has the potential to transform the process.
Read More
The New Rules of Cutting Tools — Rule #2: Demand App Expertise
The support of a knowledgeable tool supplier should be part of what you purchase with the tool.
Read More
End Mill Comparisons in CFRP, Part 2 - Diamond-Coated Tool
Video shows the performance of coated carbide, diamond-coated, PCD and veined PCD tools in carbon fiber reinforced plastic. Part two in a four-part series.
WatchEnd Mill Comparisons in CFRP, Part 3 - Conventional PCD Tool
Video shows the performance of coated carbide, diamond-coated, PCD and veined PCD tools in carbon fiber reinforced plastic. Part three in a four-part series.
Read More
