Machining Centers

HMC Accommodates 1,102-lb Loads

An addition to the company’s Ecoline series of fully featured CNC machine tools designed for job shop use, the DMC H Eco is a compact HMC with X-, Y- and Z-axis travels of 22.1" × 23.6" × 23.6"; a 26.8-hp main drive; spindle speeds to 18,000 rpm; rapid traverse to 1,970 ipm; CAT 40 tooling; a 45-position tool magaz

Machining Centers With Five-Axis Capabilities

The company introduces two machining centers, the B 300 and the C 50 U. Available in both three- and five-axis configurations, the B 300 incorporates select elements of the company’s C series machining centers, including gantry design for fast, precise movement; a trunnion table; and a mineral casting base. It feat

Compact HMC With VMC-Style Enclosure For Visibility And Access

Horizontal machining centers provide distinct advantages with regard to chip flow, allowing chips to fall away from the machining area for clean cutting conditions and long tool life. Not all shops, however, want or need the pallet-changing capabilities of a production-oriented HMC. For these users, the company has

Five-Axis Trimming Of Composites

Here is video of the five-axis motion required to trim a relatively simple composite component.

Three Spindle VMC

Developed for the aerospace industry, the Pro-4210TS is a bridge-type VMC with a full cutting range. The machine features three spindles capable of cutting three identical aerospace structural parts simultaneously to save cycle time, operation overhead and increase productivity at the same time. The machine is said

Cutting Out A Composite Structure

Milling cuts out features of a composite structure, then cuts the structure itself out of the setup.

Easy Does It

This shop specializing in small-scale parts says successfully machining tiny features into tiny workpieces is less about technology and more about technique.

HMC With 15,000-rpm Spindle

The NBH 5+ Speed HMC is designed as a manufacturing solution for large aluminum parts or tombstones in automotive, electronic and general industrial applications, combining a generous work envelope with a 15,000-rpm motorized spindle, 295-ft/min (90 m/min) linear feeds and an 80-rpm B axis. The machine's 19.7" (500

Compact HMC Features VMC-Style Enclosure

Rigid HBM Designed For Powerful Cutting