-
-
-
SPONSORED
-
Machining Centers
HMC Delivers Turning, Drilling, Milling with Single Clamping
The Heckert DBF 630 HMC, available from Starrag, enables turning, drilling and milling of non-rotational, asymmetrical parts in a single clamping with one toolholder.
Read MoreHow Much Can Unattended Production Add?
Using a horizontal machining center, this shop kept production going through two 10-hour shifts per day. That seemed like a lot, but a pallet system enabled the shop to go even further.
Read MoreRemember Fadal? It’s Back
At IMTS 2014, you’ll see that a familiar U.S. machine tool brand is back.
Read MoreVMC Equipped with FSM for Unattended Operation
Okuma will display its vertical machining center equipped with a Palletace flexible manufacturing system (FMS) for unattended operation.
Read MoreClamping Options for Five-Axis Machining
In five-axis machining, the workholding has to get out of the way. The wrong choice of clamping risks collision and can obscure one of the principal benefits of a five-axis machine.
Read MoreHMC Enables High-Speed Change-Overs
Tongtai's HA-400II horizontal machining center, available from Absolute Machine Tools, features a rigid, FEA-tested design with a cast iron machine frame and three-point leveling system.
Read MoreThe Costs and Benefits of Horizontal Machining
The shift from vertical to horizontal machining was even more expensive than this shop anticipated. It was also more valuable. Most of the shop’s machining centers are HMCs now—here’s why.
Read MoreHMC Expands Work Zone
Makino's a81nx horizontal machining center increases the size of the work zone from other NX series machines to accommodate large parts requiring diverse tool types and sizes.
Read MoreProfiler Expected to Exceed 100 Cubic Inches per Minute in Titanium
Five-axis, five-spindle machine aims at reduced cost per piece for production of large aircraft components.
Read MoreA Novel Modular Clamping System
This clamping system minimizes setup times, enable a machine to access five sides of a part and provides highly repeatable positioning for bulky components.
Read More