Horizontal Machining Centers
Five-Axis HMC Handles Heat-Resistant Materials
Available from Methods Machine Tools, the Yasda YBM 7Ti five-axis horizontal machining center features a rotary table and rigid machine structure for high-performance machining of heat-resistant materials such as titanium and Inconel.
Read MoreMarch 2015 Product Spotlight Slideshow: Machining Centers
Click through this slideshow for HMCs, VMCs, multitasking centers and more.
Read MoreMicromachining Evolution
Challenge Machine continues to add high-speed equipment for the increasing amount of micromachining work it is performing. Here are some lessons it has learned along the way, using tools as small as 0.001 inch in diameter.
Read MoreHMC Cuts Exotic Materials for Aerospace
Okuma’s MA-12500H horizontal machining center is well-suited for large-part aerospace machining in aluminum alloys, cast iron and difficult-to-machine materials.
Read MoreTurning Center Capable of Gear-Cutting, Milling and Drilling
EMCO Maier’s Hyperturn 65 Powermill offers a spindle clearance of 1,300 mm along with a counter spindle to enable four-axis machining and a B axis with direct drive for five-axis simultaneous milling operations.
Read MoreThe Foundry's Way Forward
An established supplier of short-run castings just opened and staffed a new, fully equipped, in-house CNC machine shop. Taking ownership of machining will improve the company’s range of services to customers as well as its quality control.
Read MoreSpotlight Slideshow: Machining Centers
Automatic pallet changers and support for automation are some popular features of recently released machining centers. View the December slideshow for more on these machines.
Read MoreHMC Offers Flexibility in Cutting Capabilities
Kitamura Machinery’s Mycenter-HX500G horizontal machining center, part of the company’s G series of machining centers, is designed for medium to large parts that require flexibility in cutting capabilities.
Read MoreHMC Designed for Faster Cycle Times
OKK’s HMC500 horizontal machining center features a 500-mm pallet to accommodate large workpieces and is intended to provide faster cycle times.
Read MoreFive-Axis HMC Equipped with Work-Pallet Magazine
Makino’s a51nx-5XU five-axis horizontal machining center incorporates a fifth-axis table and work pallet magazine, and is intended to serve as an alternative to single-pallet-load vertical machining centers for machining of small parts.
Read More