Products
Complete XYZ Machine Protection
The company provides a wide range of complete XYZ units that can be combined as needed and adapted to the customer’s requirements in regards to technical specifications, load, use, visual effect and economic efficiency. The units can be equipped with steel or aluminum aprons, lamella bellows or flex-protect systems
Read MoreECM System Deburrs, Smoothes And Polishes
The CoolPulse ECM machine developed by Extrude Hone removes internal and external micro-burrs from metallic components, while also smoothing and polishing surfaces. The machine has been designed for two different modes of operation, with rapid selective change-over from one to the other. The ECM system is designed
Read MoreFinite And Infinite Scheduling Software
JobBoss 11 finite and infinite scheduling software allows users complete scheduling control, the company says. The software is said to provide job shops and contract/make-to-order manufacturers with flexible capacity, short-term and long-term planning, “big picture” snapshots, material availability, human system ov
Read MoreBeltless Chip And Parts Conveyors With Twin-Roller Drive Chains
Bunting Magnetics uses 3D solid-model technology in its line of beltless MagSlide chip and parts conveyors to handle sharp, abrasive parts and scrap that can damage conventional conveyors with belts. Permanently lubricated drive chains move permanently charged high-energy ceramic or rare earth magnets inside the co
Read MoreCNC Lathe Provides High Axial And Radial Load Capacities
Jarng Yeong’s HCP/HC series CNC lathe is built with a stable body structure, one cast molding and a tempering treatment intended to ensure the life of the lathe’s mechanical accuracy. The lathe’s X and Z axes are available for slide guideways or linear guideways. The spindle is made from high-alloy steel and is har
Read MoreCompact Hydraulic Clamp
The company introduces an addition to its 5,000-psi hydraulic Link Clamp product offering. According to the company, the CLW04 offers a compact size combined with excellent holding power. The overall flange size of the clamp is 2" × 2.25" with a height of 4". The clamping force at 5,000 psi is 885 lbs, and the clam
Read MoreFive-Axis Machining Center For Tough Materials
The VG5000 five-axis machining center is said to offer stability and accuracy when machining difficult materials such as titanium and stainless and tool steels. Its large cross-roller guideways and cast-iron body offer good damping characteristics, according to the company. The machine features a 50-taper spindle t
Read MoreComplete Tool Production From Design To Grind
Virtual Grind Pro tool programming software for GrindSmart machines offers higher functionality and an interface with improved navigation, the company says. It is a modular, open system engineered to give users flexibility in tool design. Enhancements to the software include a 3D simulation of the machine, as well
Read MoreAbrasive Blaster Offers Improved Flow Characteristics
The AccuFlo micro-abrasive blaster is designed to quickly deburr small parts, remove conformal coatings and texture part surfaces. The blaster features the company’s Simoom technology, which is said to improve the consistency of the air/abrasive flow and provide tighter control over the volume of powder flowing thr
Read MoreLarge-Capacity Filter Housings
NCO housings provide large dirt-holding capacity combined with a rugged design rated to 150 psi, the company says. They incorporate a hinged, eye nut cover that is designed to be easily removed to reduce time spent on bag or cartridge change-out. With their unistyle design (side and bottom outlet), the housings are
Read MoreActuator Provides Low Dust Generation
Built for clean room environments, the CGL15N/CGL20N actuator possesses a clean, corrosion-resistant and maintenance-free design, the company says. For low particle generation, the actuator features a seal mechanism and a full-size cover. AFE-CA grease is also used to reduce dust. The actuator’s ballscrew and LM gu
Read MoreCompact HMC With VMC-Style Enclosure For Visibility And Access
Horizontal machining centers provide distinct advantages with regard to chip flow, allowing chips to fall away from the machining area for clean cutting conditions and long tool life. Not all shops, however, want or need the pallet-changing capabilities of a production-oriented HMC. For these users, the company has
Read More
