Tooling
Workholding For Aggressive Machining Operations
Designed to increase the versatility of standard 4" and 6" vises, the TalonGrip bolt-on system is suited for performing aggressive machining operations while clamping on as little as 0. 060" of workpiece material. The system is said to be ideal for small lot sizes, difficult applications and prototype work.
Read MoreMagnetic Workholding Devices In Two Styles
The company features two styles of magnetic workholding devices: permanent magnetic blocks and electro-permanent magnets. According to the company, magnets are ideal for machining flat stock steel because they provide access to five sides of the workpiece. Part setups are quick and easy, the company says, and the magnetic devices maintain maximum hold-down force.
Read MoreCollet-Chuck-Style Broach Tool Holders
The versatile collet-chuck-style broach toolholders use ER-style collets, which are said to reduce the time-consuming, three-screw method of centering a high speed steel broach in the broach toolholder. Also, an ER style collet can hold broaches with shanks of virtually any diameter within its range. For example, one holder can hold three different broach tools with varying shank diameters.
Read MoreHole-Finishing Tools Designed For Fine Surface Finishes
The company’s line of hole-finishing tools includes Burraway and Burr-Off mechanical deburring tools for controlled edge break or burr removal on both sides of holes in one pass. Shefcut precision reaming and boring tools which are designed for accurate size, fine finish and superior hole geometry are also available. Tools for burnishing include multi-roll, single-roll, and diamond burnishing tools, which are said to provide for accurate sizing, fine finishing, and work-hardening of bores and shafts in seconds.
Read MoreSpiral-Design Deburring System
The SBB-12 is a spiral-bottom, round-bowl deburring unit with a full circle baffle that keeps parts in the media mass constantly for faster, more precise processing. The unit features a 12-cubic-foot, urethane-lined tub for parts protection. Other spiral-bottom models have tub capacities of 8 to 12 cubic feet and custom-designed models can have capacities as much as 100 cubic feet.
Read MoreCobalt HSS Drill For Deep-Hole Drilling
For deep-hole drilling, the company offers the Helios 15D and 20D cobalt HSS drills. The drills can process deep holes without the use of an internal coolant supply and without pecking. The flute design improves chip evacuation, making it feasible to drill as much as 20 × D without pecking.
Read MoreApplication-Specific Conical Ball-Nose End Mills
These conical ball nose end mills are designed for machining specific components in several key manufacturing segments, including automotive, aerospace, energy and HVAC.
Read MoreDurable Steel Toggle Clamps
The company introduces a variety of toggle clamps with safety locks. Latch-action toggle clamps are available in five sizes ranging from 360- to 7,500-lbs capacity. All are equipped with a threaded U bolt for adjustability and a matching latch plate.
Read MoreDeburring System Features Return-To-Operator System
The company has expanded its Tri-Ten planetary head deburring system to include a return-to-operator (RTO) configuration. The series is designed to deburr both sides of a part in a single pass. Parts are loaded at one end and a magnetic conveyor passes them through an offset planetary deburring head where three fiber abrasive brushes deburr the upward-facing surface.
Read MoreFeed System Automates Production
According to the manufacturer, the advanced feed system allows companies to increase productivity, decrease setup time, reduce operator error and virtually eliminate waste. The feed system can turn a semi-automatic machine into a fully automatic production machine. Operators can either manually enter dimensions into the controller or pull a cut list directly from the controller.
Read More