-
-
-
-
SPONSORED
Machines
Cylindrical Drive Shaft Motors Replace Ballscrews on Upgraded Wire EDMs
In addition to linear shaft motor technology, the MV series from Mitsubishi EDM now features a redesigned automatic wire rethreading system, an enhanced power supply and high speed communication in the servo system, among other advances.
Read MoreDual-Spindle Vertical Turning Center Cuts Chip-to-Chip Times
The VL2 P vertical turning center from Emag uses two spindles working in pendular mode to complete-machine workpieces as large as 100 mm in diameter in two setups.
Read MoreSliding/Fixed Headstock Lathe Adds B Axis for Complex Machining
Index’s Traub TNL18-7B sliding/fixed headstock automatic lathe features seven linear axes and an additional B axis for particularly challenging machining tasks.
Read MoreVertical Turning Lathes Available in Range of Configurations
Available from YMT, YSP’s line of CNC vertical turning lathes (VTLs) range from 8" chucks to 32" turret-type machines in single or twin configurations.
Read MoreCompact Milling Center Handles Large Workpieces
Featuring stable construction and a swivel-type indexing table, the compact DMU 65 monoBLOCK universal milling center from DMG/Mori Seiki offers a large work area that can accommodate oversized workpieces as large as 840 mm in diameter and weights ranging to 1,800 kg.
Read MoreTechnology Improves HMC Productivity
Makino’s Inertia Active Control (IAC) technology for HMCs optimizes B-axis rotation of the direct-drive rotary table to reduce non-cut time, resulting in improved efficiency and profitability for manufacturers.
Read MoreMultitasking Turning Center Offers High Speed, Rigidity
Methods Machine Tools’ Nakamura-Tome WT-150 II eight-axis, multitasking turning center features opposed twin-spindle, two-turret construction for increased speed and rigidity.
Read MoreAuto EDM Wire Changers Compete at the High End
Automatic EDM wire-change capability can improve efficiency and reduce costs for high-end tool and die work, especially parts with small internal radii.
Read MoreShop Capitalizes on Water Over Wire
Two abrasive waterjet systems from Omax provide a cost-effective alternative to wire EDM and enable this shop to take on new work.
Read MoreCell’s Benefits Derive From Sum of Its Parts
This shop’s experience with implementing a cell consisting of four robot-fed HMCS demonstrates that success depends on more than automation alone.
Read More