Holemaking
Monaghan Tooling's Top Speed Ring Reamer Enables Higher Feed Rates
Monaghan Tooling Group’s Top Speed Ring is a reamer designed to provide higher feed rates over traditional cutting rings.
Read More
Tungaloy's TungBoreMini Combines Drilling and ID, OD Turning
The TungBoreMini, a multifunctional drilling and turning tool from Tungaloy, is designed to combine the capabilities of drilling and OD and ID turning tools.
Read More
Emuge Expands FPC Chuck Line with Slim Models
Emuge has expanded its line of FPC Milling/ Drilling Chucks products to include Slim Line models that are designed to enhance five-axis machining productivity and versatility.
Read More
Deep-Hole Drilling Automation Is More Than Part Load/Unload
Automation inside deep-hole drilling machines can be more valuable than part handling outside of them.
Read More
Drilling and Chamfering Tool Solves Machine Shop's Vexing Problem
An oil & gas part with a lot of holes required that Utex use two different tools to ensure burr-free inner and outer diameters. With Heule’s Vex-S tool, the shop realized time savings per cycle of an entire minute by performing drilling and chamfering in a single step.
Read More
Horn's Supermini Gets an Insert Geometry for Drilling, Boring, Face Turning and Skimming
Designed for the Supermini tool system, Horn’s HP geometry is suitable for drilling, boring, face turning and skimming.
Read More
How to Improve Peck Drilling Canned Cycles
Most CNCs don’t have a canned cycle for machining deep holes into malleable materials. Here’s what you do.
Read More
Sunnen's DirectDex Deep-Hole Drilling System for Heat-Resistant Superalloys
Sunnen Products Co.’s DirectDex series of drill heads, inserts and pads are said to be directly interchangeable with Sandvik deep-hole drilling tools.
Read More
Multitasking Machining Center Cuts Process Steps as Well as Metal
Consistent queue delays between the lathe and the drilling machine led Koso KentIntrol to purchase a multitasking machine from Starrag that was capable of doing both.
Read More
Mapal's EasyAdjust System Simplifies External Reaming Setup
Mapal’s EasyAdjust (EA) tool system is designed for external reaming for machining of small outer diameters.
Read More
