Cutting Tools
Dormer Pramet's SNGX11 Insert Enables High-Feed Milling in Steel
The double-sided SNGX11 insert from Dormer Pramet is capable of high-feed milling with a depth of cut ranging to 0.07".
Read More
PCBN Inserts from Kennametal Make Hard Turning More Cost-Effective
Kennametal’s KBH10B and KBH20B grades, designed for hard turning, are available in double-sided inserts for materials as hard as 65 HRC.
Read More
Tool Setting Fixture Boosts Process Security for High-Volume Shop
Along with switching to a different milling tool to improve surface finishes on aluminum parts, Alupress also employed Mapal's Uniset-P setting fixture to make the process reliable and efficient.
Read More
Drilling and Chamfering Tool Solves Machine Shop's Vexing Problem
An oil & gas part with a lot of holes required that Utex use two different tools to ensure burr-free inner and outer diameters. With Heule’s Vex-S tool, the shop realized time savings per cycle of an entire minute by performing drilling and chamfering in a single step.
Read More
Horn's Supermini Gets an Insert Geometry for Drilling, Boring, Face Turning and Skimming
Designed for the Supermini tool system, Horn’s HP geometry is suitable for drilling, boring, face turning and skimming.
Read More
Walter's M4791 Routing Cutter Can Be Used on Lathes and Machining Centers
Walter USA has expanded its M4000 milling cutter line with the M4791, a routing cutter capable of plunging in solid material and producing a true flat bottom.
Read More
How to Improve Peck Drilling Canned Cycles
Most CNCs don’t have a canned cycle for machining deep holes into malleable materials. Here’s what you do.
Read More
Sunnen's DirectDex Deep-Hole Drilling System for Heat-Resistant Superalloys
Sunnen Products Co.’s DirectDex series of drill heads, inserts and pads are said to be directly interchangeable with Sandvik deep-hole drilling tools.
Read More
Sandvik Coromant Introduces New Insert Geometries for Grooving
Sandvik Coromant has added the -M30 and -L50 insert geometry options for its CoroMill 331 milling cutter.
Read More
Metalworking News of Note: November 2019
Orderfox.com adds an RFQ service for its users, Sandvik Coromant begins construction on new tech center in North Carolina, and other news from the metalworking industry.
Read More
