Products
EDM, Five-Axis Machine Designed For Productivity
The FO350 S ram EDM is said to increase productivity and enable fine, shiny surface finishes. The FO350S works in "blade" type applications and pre-roughed 3D cavities. It is designed with a double thermostabilization system that prevents the impact of temperature variations, allowing for maximum accuracy.
Read More
Drills Feature Replaceable Cartridge Design
The Revolution drill features a replaceable cartridge design allows users to adjust diameters up to 0. 200" (5. 1 mm), eliminating the need for specials or subsequent boring operations.
Read More
Expanded Selection Of Tooling Adapters
Thinbit, manufactured by Kaiser Tool Company, has expanded its selection of adapters for the Mini-Bore, Microbit and MiniGroove ‘N Turn tooling lines. The new adapters are available with 3/4" and 1" ODs and 1/8", 3/16", 1/4", 5/16", 3/8" and 1/2" IDs. .
Read More
Entry-Level Factory Automation Solution
The compact Kiwa-Japan KH-41 HMC is 60. 2" (1,530-mm) wide and can handle a variety of workpieces, providing an ideal entry-level factory automation solution, the company says. The HMC has a full rotary B axis and can be installed in the same space as a vertical machine.
Read MoreHigh-Performance Milling
Excelerator Mills are designed for high-performance milling in difficult-to-machine materials using the company’s ceramic inserts. Typical application areas include most hardened materials above 40 Rc and nickel- and cobalt-based super alloys. Ring Max ring-groove cutters are engineered to cut machining time of API ring grooves, the company says.
Read More
High-Performance Turning Center Built For Rigidity
The Quest CHNC turning center is available with either a 27-mm, 5C or a 42-mm, 16C collet-ready spindle. The machine is designed for high accuracy and quick job changeover to meet the demands of the medical, aerospace, defense and computer/electronics industries. This design configuration allows the use of top plates and tooling used on thousands of previous-generation CHNC machine installations worldwide.
Read MoreHandheld Analyzer With Large-Area Drift Detector
Designed for metal alloy analysis, the Thermo Scientific Niton XL3t series with geometrically optimized large-area drift detector (GOLDD) technology is said to bring lab-quality performance to a handheld XRF analyzer. It can also instantly regain lost traceability on materials. GOLDD technology delivers improvements in light element detection, overall sensitivity and measurement times, the company says.
Read MoreDurable Steel Toggle Clamps
The company introduces a variety of toggle clamps with safety locks. Latch-action toggle clamps are available in five sizes ranging from 360- to 7,500-lbs capacity. All are equipped with a threaded U bolt for adjustability and a matching latch plate.
Read More
Feed System Automates Production
According to the manufacturer, the advanced feed system allows companies to increase productivity, decrease setup time, reduce operator error and virtually eliminate waste. The feed system can turn a semi-automatic machine into a fully automatic production machine. Operators can either manually enter dimensions into the controller or pull a cut list directly from the controller.
Read MoreFront-Mount Collet Chuck
The self-contained, pneumatic B80 power collet chuck does not require a lathe, grinder or rotary table to have a hydraulic system, rear actuator, restrictive draw-tube or air-feed tubes. Instead, the collet chuck is operated by an air cylinder integrated into the collet chuck body. The device is especially useful for common toolroom lathes or flat-bed lathes, which typically don’t have hydraulic systems or other means to accommodate power chucks.
Read More
Fluid Reclamation And Part Cleaning
The 601 Versafuge is designed for fluid cleaning, chip wringing, sludge drying, parts cleaning and washing and drying. This centrifuge provides a cleaning force of 350g. According to the company, the system’s 10-gallon bowl provides cost-effective fluid reclamation for process lubrication and cooling systems.
Read More
High Clamping Force Toolholder
The powRgrip PG system uses a toolholder and collet to generate high clamping forces while maintaining a TIR of less than 0. 0001", the company says. The system is said to be ideal for high speed machining applications, and it can clamp tool shanks ranging to 1" in diameter.
Read More
