High Clamping Force Toolholder
The powRgrip PG system uses a toolholder and collet to generate high clamping forces while maintaining a TIR of less than 0. 0001", the company says. The system is said to be ideal for high speed machining applications, and it can clamp tool shanks ranging to 1" in diameter.
Share
.png;maxWidth=45;format=webp)
DMG MORI - Cincinnati
Featured Content
View More
Takumi USA
Featured Content
View More
The powRgrip PG system uses a toolholder and collet to generate high clamping forces while maintaining a TIR of less than 0.0001", the company says. The system is said to be ideal for high speed machining applications, and it can clamp tool shanks ranging to 1" in diameter.
The company also offers the ER coolant flush disk, a cooling and lubricating solution for users without coolant-through tools. Equipped with a long nose that acts like a directional spray nozzle, the flush disks can direct coolant down the shaft to the cutting tip of an end mill for extended tool life, efficient chip removal and improved results, the company says.
Additionally, the company will showcase its balancing ring system, which allows standard toolholders to be upgraded.
Related Content
-
Lyndex-Nikken Toolholders Offer Stable, Versatile Machining
Polygonal shank toolholders provide a rigid connection between the tool and machine — ideal for all processes both in turning and milling.
-
How to Mitigate Chatter to Boost Machining Rates
There are usually better solutions to chatter than just reducing the feed rate. Through vibration analysis, the chatter problem can be solved, enabling much higher metal removal rates, better quality and longer tool life.
-
Simulation and Tooling Secure High-Value Work
Simulation software and careful attention to tooling parameters have enabled Major Tool to take on ambitious projects with its complex machinery.
