Turn/Mill
Video: Setting Boring Bar Offset On A Swiss-Type
This video clip from a MasterTask Training instructional course describes how to set the X-axis geometry offset for a boring bar on a Tsugami Swiss-type lathe.
Watch
Machining Reimagined As A Lean Resource
It was a bold move for this company to install four new machine tools, including two turn-mills, at one time, but it was the only way to take the lean journey to a higher level.
Read More
High-Volume Alternative To Machining Centers
Transfer machines that are flexible rather than dedicated can run large quantities without dedicating labor or floorspace. (Includes video.)
Watch
Twin ATC, B-Axis Multitasking System
Methods Machine Tools’ Nakamura-Tome Super NTMX multitasking turn-mill offers dual 24-tool ATC magazines. Full five-axis milling capability via a Fanuc 31iA5 control is said to provide high precision and accuracy for manufacturing complex contoured components in large or small volumes for the medical, aerospace and similar industries.
Read MoreMultitasking Machine Features 150-Degree-Tilt Spindle
Mazak’s Integrex e-1060V/8 II multitasking center provides full turning and milling capabilities. The milling spindle tilts to 150 degrees for both horizontal and vertical machining operations, including angle boring and milling on multiple faces.
Read More
CNC Turning Technology Protects Craftsmanship
The consistency and efficiency provided by SNK's Prodigy GT-27 Gang-Tool Lathe enabled this manufacturer of custom, high-end flutes to concentrate more on craftsmanship and less on trivial tasks.
Read More
Turn-Mill Turns Flexibility From Vision To Reality
A change in focus to lower-volume jobs led this manufacturer to sell its multi-axis screw machine and seek a new, flexible process to avoid tying up its traditional mills and lathes. DMG’s CTX 310ECO V3 turn-mill has helped the shop improve productivity and part quality while reducing labor costs.
Read More
Video: Form Tools On CNC Lathes
Form tools are traditionally associated with non-CNC machines, but in certain applications they make sense on modern machines as well.
Watch
Twin-Spindle, Twin-Turret Turning Center Boosts Pump Manufacturer’s Productivity
Precision Downhole Pumps, a division of Cameron International, in Iola, Kansas. is using two twin-spindle, twin-turret turning centers with Y-axis milling capability to finish complex jobs in one setup instead of the six formerly required. The new machines, from Doosan Infracore, have reduced manufacturing time by more than 30 percent.
Read More
Turn With Or Without A Guide Bushing
The MLK 32/38 hybrid Swiss-type lathe from Maier USA is a seven-axis, sliding headstock machine that has a removable guide bushing. The machine offers bar capacity of 32 mm when a guide bushing is used and 38 mm without a guide bushing.
Read More
