-
-
-
-
SPONSORED
Machines
The Value Of Probing On Turn-Mills
Part probing isn’t performed as often on turn-mills as it is on conventional machine tools. It does offer advantages for multitasking machines, though. Includes video.
WatchWhen Spindle Speed is a Constraint
Though it won’t replace high speed machining, Boeing sees “low speed machining” as a viable supplement to higher-rpm machines. Using new tools and techniques, a shop’s lower-rpm machining centers can realize much more of their potential productivity in milling aluminum aircraft parts.
Read MoreVideo: Getting the Most Out of Your Standard Spindle
High spindle speed is not needed for high productivity, particularly with the right choice of cutting tool types. Techniques described in this tutorial video relate to plunge roughing, high feed milling and slotting.
WatchPinch Milling from Top to Bottom
A multitasking (turnmill) machine that can mill a workpiece top and bottom at the same time has advantages for long, slender workpieces such as turbine blades, propellers and aerospace structural components. Includes video.
Read MoreFive-Axis Technology
HyperMill from Open Mind Technologies features five-axis technology including automated cutter orientation techniques, collision detection and collision avoidance methods.
Read MoreVMC For High-Speed Operations
Mazak’s Nexus VCN 700D/40-II HS VMC is designed to maximize efficiency in high speed machining operations.
Read MoreVMC For Complex Geometries
Designed to machine complex geometries, Makino’s F3 VMC is designed for rigidity and micron-range positioning accuracies and repeatability.
Read MoreLarge-Scale Abrasive Waterjet Machining
Omax Corporation’s 120X JetMachining center is designed for large-scale abrasive waterjet requirements common to aerospace, petroleum and food processing industries, as well as equipment fabricators.
Read MoreDual-Pressure Valve Runs Multiple Waterjets
The remotely mounted, dual-pressure valve from Jet Edge enables operators to run multiple waterjet tables at various pressures simultaneously with a single pump. Operators can perform low-pressure piercing operations without waiting for the pump to raise or lower to the desired pressure.
Read More