Cutting Tools
Small Hole Carbide Series Expands
E-Z Burr Tool Company extends its standard, high-performance “Small Hole” carbide series to deburr hole diameters ranging from 0. 125" to 0.
Read MoreLive Lathe Tools For ID Machining
Eltool’s live tool modules combined with the company’s right angle heads are designed for internal machining of bores ranging to l" in diameter. Secondary ID milling, drilling, slotting and grooving operations can be integrated into turning operations to increase throughput, reduce handling and improve accuracy.
Read MoreCoroCut Program Grooving Line Expands
Sandvik Coromant’s expanded CoroCut program features larger insert seat sizes for wider grooves and a dedicated grade to enable higher performance in demanding parting and grooving operations. The M- and R-size inserts and holders increase the range of the parting and grooving program to cover from 0.
Read MoreSolid Carbide, Four-Flute End Mills
Iscar’s expanded Chatterfree line of solid carbide, four-flute end mills includes smaller diameter sizes of 0. 125", 0.
Read MoreDrill Program For Small Diameter Ranges
Mikron Tool’s drill program for small diameter ranges includes the MiquMill Frontchamfer. Available in diameters as small as 1 mm, the mini chamfer mill is designed to machine hard-to-reach spots.
Read MoreTool Certainty
For GKN Aerospace to overcome tool-related variations on its largest milling machines, it had to confront error sources that go unnoticed in many shops.
Read MoreGet The Feed Rate Right When Thread Milling
Does your machine control specify radial feed rate from the edge of a tool or its center? Not knowing can cause much longer cycle times or greatly reduced tool life during thread milling operations.
Read MoreExpanded End Mill Line
Primary Cutter’s expanded Supermill-XP end mill line is available in chamfer, corner- radius and sharp-corner styles, as well as in regular, stub, long and extra-long lengths. The variable-pitch end mills feature a four-flute design and a 45-degree helix angle.
Read MoreVariable-Design End Mills
OSG’s Exocarb Aero UVX variable index and variable helix end mills couple positive edge geometry with a variable helix design. The end mills can achieve more consistent, chatter-free milling versus common variable-design end mills, the company says.
Read MoreCutters Compress To Effectively Machine Composites
The combined up-cut and down-cut spiral flutes on these cutters compress layered composites to prevent delamination during machining.
Read More
