CAD/CAM
Software Upgrade Features Dynamic Milling Techniques
Mastercam X5 from CNC Software features dynamic milling techniques, multi-axis machining, smart hybrid finishing and more.
Read MoreSoftware Update Includes Faster Toolpath Creation Time
Available from Planit, Edgecam’s software update, Edgecam 2011 R1, bundles a range of milling functionalities into one special “composite” feature designed to optimize roughing and reduce tool changes.
Read More
Toolpath Engine Benefits Extend Beyond Cycle Time
Available from Celeritive Technologies, VoluMill is a plug-in toolpath engine designed to maintain a constant load on the cutting tool and enable machines to operate at peak efficiency. However, as the experience of this firearms manufacturer demonstrates, its benefits extend beyond improved cycle time, tool life and metal removal rates.
Read More
CAM Features Facilitate Five-Axis “Hog-Outs”
A point of pride for this shop is its ability to take on projects others wouldn’t touch. Recently, capabilities within Mastercam CAM software enabled the company to overcome challenges with a difficult aerospace component and, more significantly, to bring in new, similar work.
Watch
Software Update Focuses on Multi-Function, Turn-Mill Support
SmartCAM V17.5 from SmartCAMcnc offers several new features and code-generation capabilities designed to improve support for multi-function and turn-mill machinery.
Read More
Program Safe Tool Paths
The 2011 version of Delcam’s PowerMill CAM system for five-axis and high-speed machining is said to ease programming of safe tool paths with new stock-model engagement options that protect both the cutting tool and the machine from excessive loading.
Read More
Dedicated Programming for Bar-Fed Mills
PartMaker version 2011 is available with a specialist functionality designed for programming and simulating bar-fed mills.
Read More
CNC Machine Simulation, Optimization Software Update
CGTech’s Vericut 7.1 CNC machine simulation and optimization software enables users to reduce scrap loss and rework by eliminating manual prove-out of NC programs.
Read More
Software Balloons Both 3D Models and 2D Drawings
Available from Extensible CAD Technologies, the updated InspectionXpert for CATIA V5 introduces support for 3D models in addition to previously supported 2D drawings.
Read More
3D Design Software Increases Functionality
The PowerSHAPE Companion for PartMaker is based on Delcam’s PowerSHAPE design software.
Read More
