Automation
Automation On Demand
A workpiece gripper that installs in a machine tool's spindle enables the machine to serve as its own robot.
Read More
Five-Axis VMC For Accurate Hard Milling Applications
The company offers a five-axis version of its V33i hard milling VMC, the V33i-5XB. The VMC will be integrated with an Erowa robot at the show to demonstrate how shops can utilize automation in high-accuracy hard milling applications.
Read More
Programmable Tool Verification And Breakage Control System
The Mida Laser 75P non-contact programmable tool setting system incorporates a protection system with air-tunnel effect, a powerful integrated microprocessor for best performance under coolant, an active drip rejection filter and enhanced noise reduction with double filtering technology. The programmable system can be adapted to the tool type under verification, to the same rotation speed used during machining and to the desired measuring cycle. The system is available with a “collimated” or “focused” laser beam.
Read More
Entry-Level Factory Automation Solution
The compact Kiwa-Japan KH-41 HMC is 60. 2" (1,530-mm) wide and can handle a variety of workpieces, providing an ideal entry-level factory automation solution, the company says. The HMC has a full rotary B axis and can be installed in the same space as a vertical machine.
Read More
Specialty CAD CAM Reseller
The CAD/CAM reseller specializes in programming seven-axis robots with Robotmaster CAD/CAM; providing complete machine communications for all CNC equipment with Cimco DNC-Max; and machining two- through five-axis tool paths with Mastercam CAD/CAM software. The company also offers service, support, training and consulting. .
Read More
Feed System Automates Production
According to the manufacturer, the advanced feed system allows companies to increase productivity, decrease setup time, reduce operator error and virtually eliminate waste. The feed system can turn a semi-automatic machine into a fully automatic production machine. Operators can either manually enter dimensions into the controller or pull a cut list directly from the controller.
Read More
CNC Training Software Available On CD ROM
Siemens Energy & Automation offers its SinuTrain solution, a package of CNC training software on CD-ROM that runs with Windows XP. To further speed the program-generation protocol, NC programs can be developed and simulated using a direct connection to the company’s CAD systems. In this way, mill and lathe operators not only learn the control language commands, but also visualize part programs on PC screens that are identical to actual machine screens.
Read More
Software Gives Offline Programming “Real” Robot Feel
Motoman’s enhanced graphics simulator, MotoSim EG, is available with virtual robot controller (VRC) capability, which is said to provide accurate 3D simulation of robot cells. With VRC, the software operates and displays the actual programming pendant interface for the NX100 controller. The interface display is the same whether a programmer uses a teach pendant on the controller or uses the software on a PC.
Read More
Probing Beyond Prismatic
This manufacturer has used on-machine probing to help automate setups and maintain process control for prismatic parts produced on VMCs for years. The metrology products maker recently implemented probing strategies that let it achieve similar results on its turn-mills and Swiss-types. The smaller, more economical batch sizes these machines now produce are better aligned with true production requirements.
Read MoreTurn-Mill Center Features Three Y-Axis Turrets
The company’s B765Y3 has more than 4" of Y-axis travel on all three turrets. Combined with the company’s standard tooling, customers can load as many as 144 cutting tools, allowing them to either machine several different parts without any change-over time or load several redundant cutting tools (using the company’s tool load software to detect tool wear and run “lights out”). The machine has 2.
Read More
