Presettable Toolholders Enable Quick Tool Changes
Available from Schwanog, Göltenbodt’s next-generation line of toolholders is designed for Tornos MultiSwiss 6X4 and Star Swiss-type automatic lathes.
.jpg;width=70;height=70;mode=crop;format=webp)
Share
Available from Schwanog, Göltenbodt’s next-generation line of toolholders is designed for Tornos MultiSwiss 6X4 and Star Swiss-type automatic lathes. According to the company, the toolholders are presettable in the X, Y and Z axes outside of the machine and offer repeatability better than 0.0002". A rigid design enables chatter-free operation, reliability and long tool life. Coolant-through toolholders with pressure ratings ranging to 500 psi are available.
Related Content
-
How to Mitigate Chatter to Boost Machining Rates
There are usually better solutions to chatter than just reducing the feed rate. Through vibration analysis, the chatter problem can be solved, enabling much higher metal removal rates, better quality and longer tool life.
-
Quick-Change Tool Heads Reduce Setup on Swiss-Type Turning Centers
This new quick-change tooling system enables shops to get more production from their Swiss turning centers through reduced tool setup time and matches the performance of a solid tool.
-
Through-Coolant System Cuts Nickel-Alloy Cycle Times by 70%
Decker Machine Works recently adopted Rego-Fix’s reCool through-coolant system for ER collets, reducing the cycle times on a nickel alloy job by 70%.
