Monaghan Compensation Chucks Convert Standard ER Holders
Diatool ER Hydraulic Compensation Chucks enable users to convert standard ER holders to a repeatable, steerable hydraulic chuck for more precise machining.
Share
ECi Software Solutions, Inc.
Featured Content
View More
Monaghan Tooling Group’s Diatool ER Hydraulic Compensation Chucks are designed to convert standard ER holders to a repeatable, steerable hydraulic chuck for more precise machining.
According to the company, less than 2-micron runout is attainable for ER 20, ER25, ER32 and ER40 collet chuck holders, providing the benefits of a hydraulic chuck without a high investment. Their adjustability of concentricity enables users to achieve proper tool alignment every time. Initial setup is said to be easy, and future tool changeout is accomplished by loosening a single screw.
Monaghan says there is no need to re-indicate at every tool change, saving time and ensuring precision. The Diatool ER Hydraulic Compensation Chuck can be adjusted to compensate for any runout in the spindle, making it ideal for a wide range of uses including tight tolerance reaming or drilling applications.
Related Content
-
Five Common Mistakes Shops Make with ER Collets (And How to Prevent Them)
Collets play a crucial role in the machining process, so proper tool assembly and maintenance is important. Here are five potential pitfalls to avoid when using ER collets.
-
How to Mitigate Chatter to Boost Machining Rates
There are usually better solutions to chatter than just reducing the feed rate. Through vibration analysis, the chatter problem can be solved, enabling much higher metal removal rates, better quality and longer tool life.
-
Big Daishowa Chuck Eliminates Chatter in Milling Operations
The Mega 12DS chuck is designed for trochoidal milling with anti-vibration end mills.
