LNS Bar Feeder Enables Rapid Changeovers
The Quick Load Servo 65 servo drive enables accurate positioning at high speeds without losing contact between the pusher and bar stock.
Share
Hwacheon Machinery America, Inc.
Featured Content
View More
ECi Software Solutions, Inc.
Featured Content
View More
Autodesk, Inc.
Featured Content
View More
Takumi USA
Featured Content
View More
LNS North America’s Quick Load Servo (QLS) 65 automatic bar feeder is designed to load bar diameters from 6-67 mm and bar lengths from 150-1,600 mm.
Changeovers are said to be quick and easy. Users can enter the diameter into the advanced human-machine interface (HMI) and QLS 65 automatically adjusts loading height, selection fingers, applied torques and speeds. The QLS 65 servo drive enables accurate positioning at high speeds without losing contact between the pusher and bar stock.
A high-capacity (630 mm deep) magazine rack holds up to 9, 65 mm or 63, 10 mm bars for unattended and lights-out production runs. The retraction system may be installed in either X or Z direction, and the touch-screen HMI provides a multilingual navigation and setup menu.
Related Content
-
Using the Toolchanger to Automate Production
Taking advantage of a feature that’s already on the machine tool, Lang’s Haubex system uses the toolchanger to move and store parts, making it an easy-to-use and cost-effective automation solution.
-
Four-Axis Horizontal Machining Doubles Shop’s Productivity
Horizontal four-axis machining enabled McKenzie CNC to cut operations and cycle times for its high-mix, high-repeat work — more than doubling its throughput.
-
Lean Approach to Automated Machine Tending Delivers Quicker Paths to Success
Almost any shop can automate at least some of its production, even in low-volume, high-mix applications. The key to getting started is finding the simplest solutions that fit your requirements. It helps to work with an automation partner that understands your needs.
