Anti-Pull System Eliminates Cutter Pullout
The secuRgrip anti-pull system from Rego-Fix locks the collet and cutter to the toolholder body to eliminate cutter slippage during metal removal applications.
Share
Takumi USA
Featured Content
View MoreECi Software Solutions, Inc.
Featured Content
View MoreThe secuRgrip anti-pull system from Rego-Fix locks the collet and cutter to the toolholder body to eliminate cutter slippage during metal removal applications. As an option in the company’s powRgrip product series, the secuRgrip system uses a locking key system and threaded cap for added cutting tool security when machining complex parts.
The system uses standard carbide or HSS end mill designs and its locking key insert is compatible with the standard ground notches found on most Weldon-type end mills. It can be used with Rego-Fix PG 25 and 32 holders in all tapers, including CAT, BT, TC, HSK, Capto and dual-contact Rego Plus. The system is compatible with all Big Plus spindles, as well.
Related Content
-
How to Mitigate Chatter to Boost Machining Rates
There are usually better solutions to chatter than just reducing the feed rate. Through vibration analysis, the chatter problem can be solved, enabling much higher metal removal rates, better quality and longer tool life.
-
T.J. Davies Retention Knobs Maximize Cutting Tool Life
Custom-made retention knobs are sized to fit the machine tool and spindle or toolholder to extend the life of existing machine tool assets.
-
Through-Coolant System Cuts Nickel-Alloy Cycle Times by 70%
Decker Machine Works recently adopted Rego-Fix’s reCool through-coolant system for ER collets, reducing the cycle times on a nickel alloy job by 70%.