Cutting Tools
Four-Flute Carbide Drill Increases OWSI's Feedrate Fourfold
Ceratizit’s line of WTX-HFDS drills saved OWSI 3.5 minutes per part on a difficult job and completely eliminated a secondary operation, increasing profitability.
Read MoreKyocera Upgrades High Speed Trochoidal and Peel Milling Tool
The T-Carb’s six-flute design reportedly enables higher feed rates at reduced tool loads, ultimately preventing breakage and failure. The ball end expansion now provides Series 51 tools 3D contouring and finishing capabilities in a variety of materials.
Read MoreWalter Unveils Round Insert Milling Cutter
According to Walter, the new Xtra·Tec XT M5468 is suitable for steel, stainless steel, cast iron, non-ferrous material with difficult cutting properties and hard machining. The company claims it is ideal for copy milling with minimal material removal.
Read MoreHigh Feed Rates or Deep Cuts - Which is Faster?
Comparing high-feed milling to other kinds, it is clear that the high feed and metal removal rates deliver on promises, but sometimes slowing down the feed and increasing the depth of cut will still end up faster.
WatchYG-1 Launches New Platform of Cutters and Inserts
YG-1’s FM10 PNMU inserts are designed to separate the cutting edge and the wiper, which results in ten true cutting edges.
Read MoreTungaloy Introduces Size 12 Inserts for Cutter Bodies
According to Tungaloy, the TungForce-Rec 12 boasts 1.5 times higher tooth density than other competing shoulder milling cutters of the same size, allowing a 16 mm (5/8″) diameter cutter to carry 3 teeth and a 50 mm (2″) diameter cutter to carry 12 teeth.
Read MoreNiigata Introduces High-Speed Jig Borer Machining Center
Niigata says the HN800-V is built with the rigidity and accuracy necessary to perform ultra-precise contour machining and boring of components with critical tolerances.
Read MoreTool Presetting Identifies and Isolates Costly Problems
Speroni’s Futura CNC presetter enabled Cogitic to diagnose runout and wear problems with its tooling before running the tools on its machines, saving time and expensive material.
Read MoreWalter's Thread Formers Reduce Torque, Improve Lubrication
Walter’s TC420 Supreme thread features a radial internal coolant for blind-hole and through-hole threads, which the company claims is optimized for maximum performance in universal applications.
Read MoreConcept Prove-Outs Prove Their Worth in Robotic Finishing
Different automated material removal applications teach similar lessons about the value of early testing, close collaboration and adventurous thinking.
Read More