End Mills Cut Steel and Cast Iron
LMT Onsrud has added end mills for steel and cast iron to its high-performance end mill range.
.jpg;width=70;height=70;mode=crop;format=webp)
Share
Read Next
LMT Onsrud has added end mills for steel and cast iron to its high-performance end mill range. A combination of both variable-helix and variable-index geometry prevents harmonics and reduces chatter, leaving a quality surface finish on the workpiece, the company says. The end mills’ open-flute form is said to increase chip flow, enabling higher feed rates. The tapered web increases the tools’ toughness, and the variable helix reduces the cutting forces to increase the depth of cut that can be achieved, the company says. Better chip control, higher feed rates and increased depth of cut ensure a higher material removal rate. A combination of the substrate, the cutting edge conditioning and the PVD high-performance coating is said to result in increased tool life.
Related Content
-
How to Accelerate Robotic Deburring & Automated Material Removal
Pairing automation with air-driven motors that push cutting tool speeds up to 65,000 RPM with no duty cycle can dramatically improve throughput and improve finishing.
-
Grooving Attachment Streamlines Operation by 75%
A grooving attachment enabled Keselowski Advanced Manufacturing to reduce cycle times by over 45 minutes on a high-value, high-nickel part feature.
-
Quick-Change Tool Heads Reduce Setup on Swiss-Type Turning Centers
This new quick-change tooling system enables shops to get more production from their Swiss turning centers through reduced tool setup time and matches the performance of a solid tool.
