Published
Digital Indicators Feature Versatility Enhancements
Mahr Federal offers the next generation of its µMaxµm line of digital indicators.
Mahr Federal offers the next generation of its µMaxµm line of digital indicators. The enhanced µMaxum II line offers a range of features, including dynamic max., min. and TIR; two-point difference measurement; multiplier factor for ratio measurements; indicator serial number identification; resolution to 10 microinches; selectable continuous output; and increased battery life.
Versatility enhancements include resolution that is selectable in increments ranging from 0.001" to 0.00001" (0.02 to 0.0002 mm) to accommodate differing application requirements.
Two-point difference measurement enables comparison of different readings or calculation of measured values. The addition of Multiple Factors for ratio measurements enables chordal-type measurements, which are used for making ID/OD measurements using a V‑plate or for gage fixtures using lever-type, non-direct contacts.
For gage management, data can be output with indicator serial number. This can improve ISO tracking, in which a number of indicators are networked on a production line, or help identify which gages need to be pulled for recalibration.
Other features include normal/reverse sensing; a high-resolution digital output with analog bar graph or go/no-go display; selectable MarConnect data output via USB, OPTO ES232C, or Digimatic; application of unilateral tolerances; and an auto power-down feature, which conserves power and helps ensure increased battery life.
Two digital indicator models are available, the µMaxum II and the µMaxum II XL, which provides longer measuring ranges.
Related Content
-
How to Calibrate Gages and Certify Calibration Programs
Tips for establishing and maintaining a regular gage calibration program.
-
Turning Fixed-Body Plug Gages Inside Out
Fixed-body mechanical plug gages provide fast, high-performance measurement for tight-tolerance holes.
-
What Should Machinists Know About In-Machine Probing?
In-machine probing doesn’t reach the power of CMMs but can still be useful for pre- and mid-process control, as well as for “rough screening” of parts.