Chip Breakers Suited for Both Rough Machining, Fine Finishing
EMO 2017: Lach Diamant will demonstrate its PCD IC-Plus chip breakers, which the company says perform well during both rough machining and fine finishing when using long chipping aluminum alloys.
Lach Diamant will demonstrate its PCD IC-Plus chip breakers, which the company says perform well during both rough machining and fine finishing when using long chipping aluminum alloys. The chip breakers can guide chips with a cutting depth of 0.01 mm, and the cutting depth can be increased as high as the maximum length of the cutting edge.
Related Content
-
Buying a Lathe: The Basics
Lathes represent some of the oldest machining technology, but it’s still helpful to remember the basics when considering the purchase of a new turning machine.
-
Form Tapping Improves Tool Life, Costs
Moving from cut tapping to form tapping for a notable application cut tooling costs at Siemens Energy and increased tool life a hundredfold.
-
How Lowering Torque Improves Tapping Tool Life
Escaping the tap breakage trap requires a long look at torque and the many factors that influence it.
