Tungaloy Introduces Size 12 Inserts for Cutter Bodies
According to Tungaloy, the TungForce-Rec 12 boasts 1.5 times higher tooth density than other competing shoulder milling cutters of the same size, allowing a 16 mm (5/8″) diameter cutter to carry 3 teeth and a 50 mm (2″) diameter cutter to carry 12 teeth.
Tungaloy has expanded the TungForce-Rec square shoulder milling cutter series with size 12 inserts and cutter bodies.
TungForce-Rec is a high-density shoulder milling cutter series with a secure insert clamping system. According to Tungsloy, the size 12 inserts carry all the advantages of the existing size 06 V-bottom inserts, as well as offer an extended cutting edge length that is twice as long as the size 06. The cutter body reportedly also features the same rigid design as TungForce-Rec 06, being furnished with a thick core diameter and heavily supported backing behind the insert. According to Tungaloy, these features enable the use of longer insert clamping screws for greater screw-thread engagement security, ensuring tool reliability when used at a high metal removal rate.
Tungaloy says the TungForce-Rec 12 boasts 1.5 times higher tooth density than other competing shoulder milling cutters of the same size, allowing a 16 mm (5/8″) diameter cutter to carry 3 teeth and a 50 mm (2″) diameter cutter to carry 12 teeth. As such, the new shoulder milling cutter can apparently run at a higher table feed than competitors when being fed at the same rate per tooth.
The new TungForce-Rec 12 offers cutter bodies available in cylindrical shanks either with standard length shanks or long shanks, modular heads with a self-centering screw coupling and shell mills. 26 total inserts have been introduced, including MM style for general purpose with nose radii ranging from 0.4 to 3.0 mm (from .016″ to .118″) and AM style for aluminum alloy with nose radii of 0.4 and 0.8 mm (.016″ and .031″).
Related Content
-
Grooving Attachment Streamlines Operation by 75%
A grooving attachment enabled Keselowski Advanced Manufacturing to reduce cycle times by over 45 minutes on a high-value, high-nickel part feature.
-
Twin Spindle Design Doubles Production of Small Parts
After experiencing process stalls in the finishing stage of production, Bryan Machine Service designed an air-powered twin spindle and indexable rotating base to effectively double its production of small parts.
-
Shoulder Milling Cuts Racing Part's Cycle Time By Over 50%
Pairing a shoulder mill with a five-axis machine has cut costs and cycle times for one of TTI Machine’s parts, enabling it to support a niche racing community.